Computer-based business systems need clean power
Computers, point of sale equipment, telecommunications and
manufacturing systems all rely on semiconductors to operate.
Semiconductors perform by processing electric signals of less
than a few volts each. Transient voltage disturbances confuse
that process. Data may be lost or corrupted. Instructions
garbled. Processes stopped. Systems need to be reset. Worst
case, electrical overstress can destroy or degrade
semiconductor material. The results are increasingly unreliable
operation or seemingly random, sudden failures.
ONEAC’s unique solution
ONEAC power conditioners assure reliable electronic
performance by isolating critical semiconductor-based circuits
from the harsh electrical environment. They differ from surge
suppressors in that they limit not only peak voltages
(amplitude), but also edge speed (frequency) of electrical
transients. ONEAC’s low impedance transformer and Virtual
remove the full spectrum of conducted
power-line noise in all modes. And, they convert a noisy safety
ground to a noise-free signal ground. It’s an approach that has
proven uniquely effective against all electrical disturbances.
For increased productivity
By any technical measure — surge voltage let-through, high
frequency filtering, stability, predictability, or durability —
ONEAC power conditioners meet a far higher performance
standard than conventional protection products. That
translates into more reliable performance from the systems
ONEAC protects. Field tests confirm it. Those who use
ONEAC power conditioners in place of surge suppressor-based
products, with or without a dedicated I/G circuit, dramatically
reduce system crashes, unexplained system errors and other
"soft" failures as well as hardware failures. So they enjoy a
reduction in downtime and fewer service calls.
Robust design, proven durability
Designed and manufactured under ISO 9001 quality
procedures, ONEAC power conditioners have no parts that
wear out. They last far longer than surge suppressors. And are
highly reliable, even in harsh electrical environments. Their
exceptionally high mean time between failures (MTBF) backs
that up. So do we with a comprehensive 5-year warranty. Plus
ONEAC can engineer site-specific protection schemes to
protect critical equipment by eliminating power problems
• Global variations: available for world-wide specifications
• Reliable low impedance transformer design: provides constant and
consistent protection against voltage spikes.
• Tight surge let-through: highest possible assurance that conducted
transient voltages won’t damage or degrade hardware components.
• Virtual Kelvin Ground: maximizes system reliability by preventing
“soft errors” and other symptoms of logic disruption caused by
• Optional ONEGROUND™ technology: prevents costly damage to I/O
boards, minimizes disruption and degradation caused by ground
• Front panel indicator lights: inform the user of output power and
possible wiring fault conditions.
• Maintenance-free: no parts that wear out so total lifetime cost is
limited to the original purchase price.
• Small footprint, optional wallmount, quiet operation: unobtrusively
fits into any environment.
• Plug and play: easy installation saves money and adds flexibility.
• Designed and manufactured under ISO 9001: assures consistent
quality and performance.
• Safety approvals: UL, cUL and CE on I models
• 5-year warranty: the best assurance of product quality and
performance in the industry.
O N E A C C o n d i t i o n O n e®
S e r i e s P o w e r C o n d i t i o n e r s ( 7 5 - 1 0 0 0 VA ):
Business systems, which are critical to generating revenue and maintaining data, face reliability and
performance expectations which cannot be compromised. ONEAC ConditionOne Series power
conditioners provide the clean power necessary for those systems to perform as they were designed.
A H I G H E R L E V E L O F C O N F I D E N C E
A C h l o r i d e P o w e r P r o t e c t i o n C o m p a n yO N E A C C o n d i t i o n O n e S e r i e s P o w e r C o n d i t i o n e r s ( 7 5 - 1 0 0 0 VA ) : Specifications
ONEAC, ConditionOne and Virtual Kelvin Ground are registered trademarks and ONEGROUND
is a trademark of ONEAC Corporation. All other trademarks, product and corporate names
are the property of their respective owners.
ONEAC’s unique power conditioning architecture provides unmatched
protection against the full range of power line disturbances. Components
Full output isolation: ONEAC’s proprietary low impedance transformer
design. Completely safeguards against lightning and other high energy
surges without creating detrimental side effects.
Virtual Kelvin Ground: Eliminates the full spectrum of conducted power
line noise (from 50 kHz to 10 MHz) in all modes, reduces the effects of
electrostatic discharge (ESD), and provides an exceptionally clean signal
reference ground for electronic systems.
Optional ONEGROUND: Diverts transient errant current from flowing
through ground circuit leads of datacom cables—minimizing the effect of
ground potential shifts that can effect the performance of interconnected
60 Hz units are UL and cUL listed under UL1012 and C22.2, No. 107.1.
50/60 Hz units are UL and cUL listed under UL1012 and UL60950 and
carry the CE mark.
Nominal input/output voltage: A Models - 120/120 V, 60 Hz
I Models - 200-240 VAC, 50/60 Hz
Surge voltage withstand capability: ANSI/IEEE C62.41 Category A&B,
6 kV/200 & 500 A, 100 kHz ringwave
Surge and Noise Rejection-Isolation: with unit under power, and ANSI/IEEE
C62.41 Category A pulse applied either normal mode (L-N) or common mode
(N-G) at the input, the noise output voltage will be less than 10 V normal mode
and less than 0.5 V common mode in all four quadrants using a Keytek 711A/J
(or equivalent) surge generator and a low-voltage, high sensitivity probe
Load Power Factor: 0.3 leading to 0.3 lagging
Load Regulation Response Time: <2 msec for a 50% change in load
Interruption Response Time: output voltage will track input voltage in less
than 2 msec at power-off and power-on for a single-cycle asynchronous notch
Distortion: <1% THD added into a resistive load
Overload Protection: push to reset circuit breaker (75-350 Va models)
rocker arm switch circuit breaker (550-1000 VA models)
(800) 327 8801 OPT. 2 in USA AND CANADA +44 0 2380 610311 in UK AND EUROPE
27944 N. Bradley Road, Libertyville, IL 60048 Phone 847 816-6000 FAX 847 680-5124 George Curl Way, Southampton, Hampshire SO18 2RY, UK FAX +44 0 2380 612039www.oneac.com
All specifications subject to change without notice. © 2002 ONEAC Corporation Printed in U.S.A. Part # 917-155 Rev. B
C E R T I F I E D
ONEAC is a UL/BSI
registered corporation —
Certification No. A2900
A H I G H E R L E V E L O F C O N F I D E N C E
A C h l o r i d e P o w e r P r o t e c t i o n C o m p a n y
VA Amps Input Output H x W x D Shipping Standard Wall Mount** ONEground
Connectors* Connectors Inches (mm) Weight - lbs (kg) Part Number Part Number Part Number
75 0.63 5-15P (2) 5-15R 4.8 x 4.1 x 7.4 (122 x 104 x 188) 6 (2.7) PC075A-S2S PC075A-S2SW PC075AG-S2S
120 1 5-15P (2) 5-15R 4.8 x 4.1 x 7.4 (122 x 104 x 188) 7 (3.2) PC120A-S2S PC120A-S2SW PC120AG-S2S
180 1.5 5-15P (2) 5-15R 4.8 x 4.1 x 7.4 (122 x 104 x 188) 8 (3.6) PC180A-S2S PC180A-S2SW PC180AG-S2S
240 2 5-15P (4) 5-15R 4.8 x 4.1 x 7.4 (122 x 104 x 188) 11 (5.0) PC240A-S4S PC240A-S4SW PC240AG-S4S***
360 3 5-15P (4) 5-15R 4.8 x 4.1 x 7.4 (122 x 104 x 188) 12 (5.4) PC360A-S4S PC360A-S4SW PC360AG-S4S***
550 4.6 5-15P (4) 5-15R 5.4 x 6.4 x 10.9 (137 x 163 x 277) 21 (9.5) PC550A-S4S PC550A-S4SW PC550AG-S4S
750 6.2 5-15P (4) 5-15R 5.4 x 6.4 x 10.9 (137 x 163 x 277) 24 (10.9) PC750A-S4S PC750A-S4SW PC750AG-S4S
1000 8.4 5-15P (4) 5-15R 5.4 x 6.4 x 10.9 (137 x 163 x 277) 27 (12.3) PC1000A-S4S PC1000A-S4SW PC1000AG-S4S
75 0.32 IEC320 (2) IEC320 4.8 x 4.1 x 7.4 (122 x 104 x 188) 8 (3.6) PC075I-C2C PC075I-C2CW PC075IG-C2C
120 0.5 IEC320 (2) IEC320 4.8 x 4.1 x 7.4 (122 x 104 x 188) 8 (3.6) PC120I-C2C PC120I-C2CW PC120IG-C2C
180 0.75 IEC320 (4) IEC320 4.8 x 4.1 x 7.4 (122 x 104 x 188) 12 (5.4) PC180I-C4C PC180I-C4CW PC180IG-C4C***
240 1 IEC320 (4) IEC320 4.8 x 4.1 x 7.4 (122 x 104 x 188) 12 (5.4) PC240I-C4C PC240I-C4CW PC240IG-C4C***
360 1.5 IEC320 (4) IEC320 4.8 x 4.1 x 9.0 (122 x 104 x 229) 13 (8.9) PC360I-C4C PC360I-C4CW PC360IG-C4C
550 2.3 IEC320 (4) IEC320 5.4 x 6.4 x 10.9 (137 x 163 x 277) 19 (8.6) PC550I-C4C PC550I-C4CW PC550IG-C4C
750 3.1 IEC320 (4) IEC320 5.4 x 6.4 x 10.9 (137 x 163 x 277) 25 (11.3) PC750I-C4C PC750I-C4CW PC750IG-C4C
1000 4.2 IEC320 (4) IEC320 5.4 x 6.4 x 10.9 (137 x 163 x 277) 30 (13.6) PC1000I-C4C PC1000I-C4CW PC1000IG-C4C
* Six foot line cord is standard on 60 Hz units.
** Wallmount option adds 1.2 inches (31 mm) to overall depth of each unit.
*** Add 1.6 inches (41 mm) to overall depth of indicated unit.
All A models (60 Hz) are available with hardwired input and output. To order, use part number suffix XXB (i.e. PC075A-XXB).
Other output configurations are available. Contact factory for details.