Fortron 400W FSP400-60PFN (PFC) ATX P4 Quiet Power SupplyHigh quality and high power coefficient PFC power supply. Excellent for high quality users and overclockers! A highly filtered and quiet 400Watts, six output unit with remote on/off, built-in EMI filter, and UL, CSA, TUV, CB, CE, NEMKO approvals. Designed for Pentium 4 motherboards, also downward compatible with standard ATX motherboards. OEM
Features: High efficiency. Internal 12 VDC fan included. Low noise and ripple. Complies with FCC part 15 subpart J class B 115 VAC operation and CISPR 22 Class B 230 VAC operation. Output over voltage protection. Short circuit protection on all outputs. MTBF above 50,000 hrs. at 25oC. 100% Hi-pot & ATE tested. Short circuit protection on all outputs. Resettable power shut down. 100% burn-in under high ambient temp. (50oC). Approved by UL 1950, CSA C22.2 No. 234 Level 3, IEC 950, TUV EN 60950 or VDE 0805, NEMKO EN60950.
Specifications: Temperature Range: Operating, 0oC to +40Â°C. Storage, -20oC to +65Â°C. Temp. Coefficient: 0.01%/oC. Transient Response: Output voltage returns in less than 1mS max. at a 25% load change. Hold-up Time: 17.6mS min. at full & nominal input voltage. Dielectric Withstand: Input to frame ground 1800 VAC for 1 second. Humidity: 95% RH. Efficiency: 65% at DC-24 Input, at full load. Power Good Signal: Power on delay time 100mS to 500mS, off delay 1mS min. Overload Protection: 150% maximum. Dimensions (mm): 86H x 150W x 140L. INPUT: Voltage: 95 ~ 264 VAC, switch select. Frequency: 47Hz ~ 63Hz. Input Current: 8A (RMS) @ 115VAC; 4A (RMS) @ 230VAC. Inrush Current: 80A Max. for 115 VAC; 120A Max for 230VAC. DC output: +3.3V: 28A; +5V: 40A; +12V: 15A; -12V: 0.8A; -5V: 0.3A; +5VSB: 2A. Maximum power: 400W. Six IDE connectors, one floppy connector, +12V power connector, Aux power connector.